Automatic Briquette Making Machine Wood Scrape Briquetting Work Plant Biomass Briquette Machine
Product Description
Raw Materials That Are Suitable for Briquetting:
Wood Material: sawdust; leaves; bamboo; wood branches; etc.
Agriculture: rice husk; grain steams; surgarcane; bagasse; corn stalk; corn cob; etc.
Fruit Material: peanut shell; coconut shell; coffee husk; etc.
Requirements of material:
1). The inlet size of raw material must be less than 3mm. If the raw material size are bigger,
you must crush them with wood crusher firstly. The smaller the raw material, the smoothly the
briquettes surface, and the better the hardness and strength.
2). The moisture of raw material for briquetting, must be less than 10%, and the moderate is
8%- 12%, otherwise, the outlet briquettes are easily broken and have crevice. So before briquetting, you shall check the moisture content, if too wet, please drying them with sawdust dryer or under
shunshine.
Ÿ Particle size
Generally the max particle size is 20x5x3 mm in order to avoid feeding problems for the briquette press.
Ÿ Moisture content
As the optimum moisture content for briquetting purposes varies with the raw material, we know from experience that the recommended water content is from min. 6% to max. 16%.
From 16% and higher quality will deteriorate considerably until briquetting becomes hard.
Ÿ Wood waste Material
Most wood waste is suitable for briquetting depending on its content of lignin as well as the moisture content and particle size etc.
Ÿ Demolition wood
Different kinds of demolition wood are available in an increasing amount around us and it can be turned into valuable fuel briquettes for private consumers or industrial use.
Ÿ Agricultural waste
Agricultural wastes such as organic wastes typically animal wastes or dead plants, are usually not harmful to the environment; on the contrary, they can enrich the soil with nutrients and minerals.
Alternatively agricultural waste like straw and stalks etc. is also very suitable for production of briquettes.
Ÿ Paper and cardboard
Ÿ Plastic
Ÿ Others
Flow chart:
Feartures of Mechanical stamping briquette pressing machine:
• Optional mixer for adding moisture to the raw material
• Flexible die system.
• Easy commissioning as factory tested with your raw material
• Easy to relocate.
• Sturdy design - Suitable for running 24hours.
• Easy to service and low maintenance costs
• NO binder needed during production to make clean & green fuel briquette.
• Quantity of heat of final product is 500-1000Kcal higher than raw material.
Specifications of Briquette Machine Cheap Price:
| Briquette Machine Cheap Price |
| Capacity | 1000Kg/Hour |
| Power | Main Engine Power: 45Kw |
| Total Power: 61Kw |
| Feeding Raw Materials Size | Less than or equal to 30mm |
| Raw Materials Moisture Content | 10-20% |
| Final Briquette Size | 70-80mm Diameters |
| Density of Briquette | 10.-1.2g/CM3 |
| Briquette Moisture Content | Less than or equal to 12% |
| Machine Size(L*W*H) | 3.5*1.7*1.8meters |
| Machine Weight | 8000Kg |
Final products of Mechanical stamping briquette pressing machine :
FAQ
Detail Quotation Solutions for you.
(1). What capacity do your prefer?
-----The Capacity Range of Wood Briquettes Machine:500Kg/Hour;1000Kg/Hour;2000Kg/Hour.
(2).What is your raw material?
-----According to different raw material(such as hard wood, soft wood, straw, sawdust, ricehust ).
We need to make sure whether need Wood Crusher or not.
The Final Materials Size should be less than or equal to 30mm.
MC(Moisture Content) should be Less than or equal to 12%.
(3).Final Briquettes Size Demand?
-----We have different diameters of final briquettes.(Such as:50mm, 70mm, 80mm, 90mm, 100mm).
Length of Briquettes:Adjustable.
